All Categories ​>​ Troubleshooting Obelisk

Troubleshooting Obelisk

Flashing the firmware on your Gen 1 Obelisk

Learn how to reload the firmware on your Generation 1 Obelisk.

Updated 3 weeks ago by Support

My Dashboard is partially blank

In some cases, when viewing your Obelsk Dashboard through the web interface, you may see blank sections. This happens when cgminer, the mining processing application, is not able to start or is not a…

Updated 3 months ago by Support

Change your Obelisk hostname

A hostname is a friendly name you can assign your Obelisk to distinguish it on your network from other devices. In order to change the hostname of your Obelisk, navigate to your. Obelisk Dashboard . …

Updated 5 months ago by Support

Change your Obelisk IP address

Right now, every time you reboot your Obelisk miner it gets a new IP address. Some users might want to lock down a fixed address, or may not have DHCP set up. Changing your IP settings incorrectly ca…

Updated 5 months ago by Support

Reset all user configs

To reset all user configurations for the Obelisk miner, press and hold the button on the front of the device for 10 seconds. The miner will reboot, and you can refresh and login to your dashboard onc…

Updated 4 months ago by Support

I'm seeing consistent dips in my Obelisk's performance. Why is this happening?

This is resolved with the v1.1.0 or alter firmware. Upgrade now . Seeing dips in your monitoring activity is currently expected. There is code that exits the cgminer app every 30 minutes to maintain …

Updated 3 months ago by Support