Change your Obelisk IP address

Right now, every time you reboot your Obelisk miner it gets a new IP address. Some users might want to lock down a fixed address, or may not have DHCP set up.

Changing your IP settings incorrectly can make your miner inaccessible. The IP address, subnet, and gateway must all be correct. Using an invalid DNS server will mean your Obelisk can’t communicate with pools. We recommend using DHCP if possible.

In order to change the hostname of your Obelisk, navigate to your Obelisk Dashboard.

Under the Network Settings tab, switch the DHCP setting from Enabled to Disabled.

Once DHCP is disabled, you will be able to set new values for the IP address, subnet mask, gateway, and DNS server.

  1. Enter your static values.
  2. Click Save.

The Obelisk will reboot with these new settings.

Need more help?

Email hello@obelisk.tech and our dedicated support team will be ready to help.

Need more help?

Email hello@obelisk.tech and our dedicated support team will be ready to help.


How did we do?